LOL,
totally.. i think mine was set cross-eyed which was why the beam was so bad initially.
with LEDs being so much brighter, it covered for the bad beam pattern with wide bright beam.
but even though i set the height relatively well, i occasionally got flashed by oncoming traffic from low sedans. i think what happened is that my passenger side beam was pointing to the oncoming traffic instead of straight.
but now i'm pretty confident i have the pattern down good.
Instructions please!? My passenger side is pointed out to the right while the drivers side is straight forward.
of course!!
on the attached first pic, RED arrow is for vertical/beam height adjustment.
BLUE arrow is where horizonta/side to side beam adjustment.
2nd attached image is more close up of first image. you can kinda see what the height adjustment knob looks like.
3rd attached image is my finger lifting up the plastic cover off the Horizontal adjustment knob. looks Exactly the same as vertical adjustment knob, just hidden.
for passenger side, counter clock wise rotation of the horizontal adjustment knob takes the beam further out.
clock wise brings the beam toward the centre of the car
you can turn the knob using either the allen key (looks to be about 7 mm?) or use Philips head screw driver. i just used long philips head.