So, as I write in another thread, our 13 year old Kenmore Elite Dishwasher started giving us the dreaded 7 count clean warning LED. This signifies either the heater element is toast or the control board is faulty. I measured the heating element resistance at 13 to 14 ohms so it fell within specs so it meant that the control board was likely the culprit. I sourced a new control board in Oakville at $299 so I looked around. I found one for $211 in Hamilton so I went an got it this morning. I did look at Amazon and ebay but I prefer to deal with actuaal stores when I can.
After installing the new board I found that the old board definitely over heated - see pic.
Interestingly, Whirlpool is the manufacturer and provides discount on your new washer if the control board overheats and you want to go the new dishwasher route.
Railton